However, plaster is more delicate by its nature and more prone to gouging or crumbling therefore, it needs to be handled by someone who understands how to handle it to avoid damage that might require costly repairs. Plaster doesn’t absorb as much water as drywall, so there’s less danger of oversoaking the paper and damaging the wall underneath as a result, contractors can often work more quickly to remove wallpaper from plaster walls than from drywall. Plaster and drywall, however, each have particular quirks and considerations. ![]() If it’s strippable paper, it won’t matter which substrate it’s being removed from. Wallpaper is usually adhered to plaster or drywall. ![]() The type of wall hiding behind the wallpaper will also help determine how to get wallpaper off. If a pro does the steaming, the cost to remove wallpaper will increase by about $50. Homeowners who want to DIY can rent a steamer for about $15 for half a day, or they can purchase a steamer for about $50. Steaming is a chemical-free way to take down wallpaper that uses hot water to soften the glue. Soaking and scraping will likely be the best method to remove papers that are firmly adhered to the walls. The additional labor required for the soaking and scraping may sometimes make this method more costly than stripping, but the average job costs about the same as stripping at $0.60 to $1.50 per square foot. Soaking and scraping is the common way to take off porous paper and some nonporous paper that isn’t strippable. Stripping is one of the least expensive methods, averaging between $0.60 and $1.50 per square foot it can be slightly more costly if the paper doesn’t strip easily or pulls apart as it’s peeling off. What’s the easiest way to remove wallpaper? Removal methods depend largely on the type of paper, but a combination of methods may be necessary depending on the type of adhesive used. Some older wallpapers, including woodchip-style paper and papers that have been painted over, will be more labor-intensive to remove and will therefore be more expensive. Homeowners can try peeling at a corner to see if the paper is strippable, or they can moisten the paper with a damp sponge or spray bottle to see whether the paper absorbs the liquid or repels it to determine what type of paper they have. Nonporous wallpaper is the most expensive to remove, as liquid can’t permeate the paper to release the adhesive, so the paper must be perforated and then either moistened with remover solution or steamed off, then scraped off in smaller pieces. Porous wallpaper, which is a traditional-style paper, usually with a matte finish that allows liquid to pass through, is also fairly simple to remove using spray liquid to soften the paper and loosen the glue. Removing this kind of wallpaper can be as simple as loosening a corner of the paper and slowly peeling it down and away from the wall, then cleaning up any residual adhesive. Newer wallpaper, sometimes called “strippable” or “removable” wallpaper, is the easiest and most inexpensive wallpaper to remove, largely because it requires very little intervention. Other decisions, such as the method of removal and labor costs, can be chosen carefully to stay within a budget. Unfortunately, homeowners can’t change the composition or size of their walls or existing wallpaper, so some of those costs may not be within their control. Not all walls are the same, and the varieties of wallpaper quality, glues, and materials can affect the cost of stripping it down. ![]() What’s the best way to remove wallpaper? It depends.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |